Model 601, Dual LED Tube Light Controller
Model 601, Dual LED Tube Light Controller
The Dual LED Tube Light Controller is interchangeable among the same market products. The controller is capable of powering up a quantity of two (2) LED Tube Lights.
To request a quote, please create an account
Each output of the LED lighting controller is isolated from the other, such that if failure occurs at one output, the other output circuitry shall not be affected. The controller is mounted on a metal plate with a gasket around the edge of the plate. Each output has short circuit protection. The controller has LED indicators that display the operational status of the controller and its two outputs to LED tube lights. The controller has an over-temperature protection feature, reverse polarity protection, etc.
Electrical Specifications
| Nominal Input Voltage | 37.5 VDC |
| Nominal Input Voltage Range | 23 – 42 VDC |
| No. of Independent Channels | 2 Channels |
| Power | 120 Watts |
| Input Protection | Reverse Voltage Protection |
| High / Low Voltage Protection | |
| Spike and Transient Protection | |
| Warranty | 5 Years |
Mechanical Specifications
| Size | 13.875″ X 2.362″ X 1.248″ |
| Connections | Connector |
| Mount | Direct Carbody |
EMI/EMC Compliance Standards
| EMI/EMC | 61k Series |
| Electrostatic Discharge | IEC 61000‐4‐2 |
| Radio Frequencies‐Enclosure | IEC 61000‐4‐3 |
| Fast Transients Burst‐Power Ports | IEC 61000‐4‐4 |
| Fast Transient Burst – Signal Ports | IED 61000‐4‐4 2kV |
| Surges – Power Ports | IED 61000‐4‐5 |
| Conducted Immunity, Power Ports | IEC 61000-4-6 |
| Pwr Port and Enclosure – Emissions Tests | CISPR11 Group 1 Class A |
Environmental Compliance Standards
| Shock & Vibration, and Bump Test | IEC 61373 |
| Operating Temperature | IEC 60068‐2‐14 |
| Cooling Test, ‐40 Deg C (96Hrs) | IEC 60068‐2‐1 |
| Dry Heat Test, 85 Deb C (96 Hrs) | IEC 60068‐2‐2 |
| Damp Heat Test, 25 Deg C t0 57 Deg C (37Hrs) | IEC 60068-2-30 |
| Flammability, Smoke Emission and Toxicity | ASTM E162 ASTM E662 BSS7239 |
